Site navigation

Gympie Widgee Crossing Sewage Treatment Plant

Drag this bar to relocate the map on your screen

Approval holder

Gympie Regional Council

Location

Widgee Crossing Road, Gympie

Status

Operational

Activity

63(1e) - Sewage Treatment, Total Daily Peak Design Capacity 10,000-50,000EP

Map points

Facility

Code	Description	Parameters monitored	Basin	Stream
Release to land monitoring points
RP2	Outlet from the effluent disinfection/storage tanks	B.O.D. 5, Daily Volume, E. coli, Electrical Conductivity, Suspended Solids, pH	Mary
Release to water monitoring points
RP1	Outlet from the treated effluent storage pond. Discharged from the end of pipe, via outfall, to the Mary River. Flow meter is located approximately 10 m downstream from chlorine storage tank, before the storage pond	Ammonia as N, B.O.D. 5, Chlorine - Total Available, D.O., Daily Volume, Electrical Conductivity, Nitrogen - Total, Phosphorus - Total, Suspended Solids, pH	Mary	Mary River

Last updated: 14 November 2019

This page should be cited as:

Department of Environment, Science and Innovation, Queensland (2019) Gympie Widgee Crossing Sewage Treatment Plant, WetlandInfo website, accessed 20 December 2024. Available at: https://wetlandinfo.des.qld.gov.au/wetlands/assessment/monitoring/point-source-release/sewage-treatment-facilities/gympie-widgee-crossing/