Skip links and keyboard navigation

Queensland Government
WetlandInfo   —   Department of the Environment, Tourism, Science and Innovation

Connectivity – Pressures

Connectivity – Pressures

HIDE THIS SECTION
Flow chart showing the major elements associated with connectivity management

Click on elements of the flow chart or select from the tabs below

Sources of change to the connectivity:

  • Habitat removal for a variety of reasons, such as buildings, foreshore development, roads, bridges and hydrological modification (e.g. reclamation, bund walls) increases habitat fragmentation and thus reduces habitat connectivity.
  • Occasionally human activities such as drainage modification may increase connectivity between wetlands.
  • Stream barriers such as dams, weirs, flood gates and culverts can have a significant effect on connectivity by physically preventing movement of biota.
  • Larger impoundments affect connectivity by reducing the frequency and extent of bank overtopping which under natural conditions recharges off-stream wetlands and allows biota to move in and out of the wetlands, e.g. a loss of lateral connectivity between rivers and billabongs.
  • A loss of connectivity can also result in a change in the natural movement of materials such as ions, nutrients, organic matter and sediments.
  • Physical barriers are not the only factors impacting connectivity, e.g. poor water quality can stop animals from accessing areas of habitat.


Last updated: 22 March 2013

This page should be cited as:

Department of Environment, Science and Innovation, Queensland (2013) Connectivity – Pressures, WetlandInfo website, accessed 14 April 2025. Available at: https://wetlandinfo.des.qld.gov.au/wetlands/management/pressures/lacustrine-palustrine-threats/connectivity/pressure.html