Approvals may be required for the construction of a treatment system. Contact your local government before any construction is undertaken to understand requirements.
Prior to construction, check for any existing infrastructure by contacting electricity, water and telecommunication providers.
If excavation is required, it is recommended that local Traditional Owners are engaged to ensure no sites or items of cultural significance are disturbed.
If excavation is required, it is recommended that local Traditional Owners are engaged to ensure no sites or items of cultural significance are disturbed.
Engineering advice should be sought prior to construction to ensure the treatment system is sized and sited appropriately.
HIDE THIS SECTION
Construction
The floating matrix is usually manufactured off site and assembled at the desired location.
Excavation of a pond may be required if there are no suitable existing waterways or ponds.
HIDE THIS SECTION
Time for establishment
Establishment of the plants requires 6-12 months, depending on location and weather conditions[1][2].
HIDE THIS SECTION
Operation
Minimal operational requirements.
Some installations may have a recirculating pump system which will require an electrical power source.
HIDE THIS SECTION
Monitoring and maintenance
Monitor plant health, including root system.
Control weeds and pests.
Harvesting/pruning of plants may be required, particularly if the aim is to remove phosphorous from the treatment system.
Suspended solids settled in the waterbody beneath the floating wetland should be removed periodically as required to ensure sufficient sediment trapping capacity and to remove any pollutants that have bound to the sediment. The operator can move the treatment wetland aside, dredge and replace the treatment wetland island.
HIDE THIS SECTION
Lifespan/replacement time
20-30 year lifespan estimated.
Regeneration of vegetation should occur naturally.
Disclaimer
In addition to the standard disclaimer located at the bottom of the page, please note the content presented is based on published knowledge of treatment systems. Many of the treatment systems described have not been trialled in different regions or land uses in Queensland. The information will be updated as new trials are conducted and monitored. If you have any additional information on treatment systems or suggestions for additional technologies please contact us using the feedback link at the bottom of this page.
HIDE THIS SECTION
References
^ Wanielista, MP, Chang, NB, Chopra, M, Xuan, ZM, Islam, K & Marimon, Z (2012), Floating Wetland Systems for Nutrient Removal in Stormwater Ponds, vol. SMA 1660 7026, Stormwater Management Academy Stormwater Management Academy Civil, Environmental, and Construction Engineering Department, University of Central Florida, Orlando, FL.
^ Winston, RJ, Hunt, WF, Kennedy, SG, Merriman, LS, Chandler, J & Brown, D (2013), 'Evaluation of floating treatment wetlands as retrofits to existing stormwater retention ponds', Ecological Engineering, vol. 54, pp. 254-265.
Last updated: 5 October 2018
This page should be cited as:
Department of Environment, Science and Innovation, Queensland (2018) Floating wetlands — Construction and operation, WetlandInfo website, accessed 13 April 2025. Available at: https://wetlandinfo.des.qld.gov.au/wetlands/management/treatment-systems/for-agriculture/treatment-sys-nav-page/floating-wetlands/construction-operation.html
HIDE THIS SECTION
— Department of the Environment, Tourism, Science and Innovation
